Go Auto

The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com

How to Find a Trucking Job
The demand for truckers is very high, and it is relatively easy for most qualified truckers to find steady work. Nonetheless, some researchers estimate that as many of 15% of drivers, even those with extensive experience, get disqualified when applying for a trucking position. Why are so many truckers getting turned away if the need for trucker is so high? It all has to do with being organized. The key to landing a trucking job is being prepared and knowing what to expect when seeking a trucking job. Most often, truckers start the hiring process by speaking to a trucking recruiter. Recruiters frequently hire only for one company (the company they work for themselves), so it may be to your advantage to shop around and talk to a number of different recruiters to find the position that is the best fit for you. If you do speak with a number of recruiters, be sure to take notes so you can keep track of who said what. Never lie to a recruiter when seeking a trucking job. The truth will come out eventually and it is much better that you be completely honest from the beginning, even if it means disclosing some negative information, than to lie and get caught for it later. Recruiters will ask you for a variety of information, so be sure to have the following on hand: - A current, non-expired CDL with an accurate home address - Your work history for at least the last 3 years (some recruiters may want 5 or 10 years of history). If you have been unemployed for some of this time, you will need to provide solid professional references to account for this period. - The names and contact information for all of your former employers. - Proof of your work history including old W2 tax forms, reference letters, or DOT numbers. This information will be especially helpful if any of the companies you worked for previously have since gone out of business. - A copy of your driving record or MVR - Proof of eligibility to work in the United States. You will be required to complete an I-9 form upon hire, so be sure you have valid documentation to show that you are eligibly for hire. New Homeland Security regulations require that al commercial truckers undergo a background check prior to being hired. As part of this check, companies will pull any criminal records and copies of your Motor Vehicle Driving record from all states in which you have a driver s license (commercial or non-commercial). Companies will also see a copy of your DAC report which will reveal previous driving jobs, any accidents in which you were involve, and notes of any problems with former employers. If there is anything on your record that might be questionable, it is very important that you disclose this to the recruiter right away. It is much better to be professional and proactive upfront than to have the recruiter undercover some nasty information on their own. A potential employer is going to need to know about any incidents, or accidents, for at least the previous three years. Be sure to hold onto all incident records, including accident reports and tickets, so that you can provide this documentation if needed. Nearly all reputable companies will also require that you undergo a drug screening, so be prepared to certify that you are drug-free and take a drug test on the spot if you are offered a position. Your offer will be contingent upon the successful results of the test. If there is anything about your past (or current) medical health that might bring up concerns about your ability to perform your duties as a trucker, be prepared to show a doctor s note that releases you to work. Although, by law, recruiters cannot ask about your medical health prior to offering you a position, an offer can be rescinded if you are not able to certify your ability to do the job. If you have recently had a medical ailment, surgery, or are taking any sort of prescription medicine, chances are high that you will be required to present a medical doctor s release noted that you are cleared for commercial tractor trailer driving with no restrictions. Finally, be prepared to a road test and pass the necessary DOT physical upon receiving an offer. If you haven t been behind the wheel in a while, make sure you brush up on your driving skills. You will not get a second test to take the test if you fail it so you want to be sharp the very first time to step into the company s cab. Although the hiring process to secure a trucking job may be long and tedious, the payoff is well worth your effort. So if you ve made it though all of these steps successfully, congratulations. You re hired!Laura Adams is a qualified careers advisor with 11 years experience. <a href="http://www.Truck-Driving-Job.info">Truckers Jobs Information</a> - Resources, News, Tips and Views to help Truck Drivers find their next jobs. http://www.Truck-Driving-Job.info Copyright Truck-Driving-Job.info This article may be reproduced as long as the resource box and live links remain intact.
Source: www.ArticlePros.com

A Woman's Guide to Basic Tire Care
Women certainly are not helpless. But sometimes we are a little overwhelmed working a 40-hour week, taking care of the children, cooking, cleaning, and doing laundry. The car is just another added burden when there isn’t a man around to tinker with it. For the woman who finds herself in this situation, this is a short primer on routine tire care that will extend the life of your tires and hopefully make your life a little bit easier. Check Tire Pressure Regularly: Tire pressure should be checked whenever you suspect a problem or at a minimum, seasonally. Symptoms of improper tire pressure include excess wear and squeeling when going around a corner (for under-inflated tires) and reduced traction (for over-inflated tires). Even the temperature can affect your tire pressure. Check your owner’s manual to find where they’ve posted the proper tire pressure (usually on one of the doors) and be sure to keep it at that level. An improperly inflated tire not only wears quicker, it can also be dangerous when stopping and can cause tread separation. You can purchase a tire-pressure gauge at your local auto parts store, use a gauge at the gas station or ask your tire dealer to check it for you. Have Your Tires Rotated: Tires should be rotated every 5000 - 6000 miles. For various reasons, all four tires on a car do not wear the same. The purpose of the tire rotation is to allow for even wear and an extended life for your tires. Some manufacturers recommend “cross-rotation” (moving the right-front tire to the left-rear, etc.). Check your owner’s manual for it’s recommendations. Have your tire dealer rotate your tires regularly. Check Your Wheel Alignment: If you’ve hit a pothole or scraped your tire on a curb, your wheels may have been thrown out of alignment. Symptoms of wheels that are out of alignment are excessive wear (one tire may wear more than the others) and steering problems. You may notice that your car veers to the side when you’re on a straight road or the car doesn’t steer properly in a turn. Unless you notice any of these symptons, you should have your alignment checked annually. Have Your Wheels Balanced at the Same Time They’re Rotated: An improperly balanced wheel will cause a vibration at higher speeds (50-70 MPH) which is noticable in the steering wheel (if a front tire is out of balance) or in the seat (if a rear tire is out of balance). It will also increase wear of shock absorbers, struts and suspensions. If you notice any of these symptoms, you should have your tire dealer take a look. He will need to locate the heavier part of the tire and attach a lead weight opposite it to counter-balance it. Unless you notice any of these symptoms, you should have your wheels balanced every time you have them rotated (every 5000 - 6000 miles). Debbie Pettitt Everything Tires http://everythingtires.com Debbie Pettitt is webmaster for Everything Tires. For additional articles and information regarding tires, visit http://everythingtires.com.
Source: www.ArticlePros.com