Go Auto

Buying The Right Spare Parts For Your Car
All car owners want the best for their automobiles. Therefore, they are providing it utmost care through regular maintenance checks. The engine must be tuned-up and checked from time to time, the oil has to be changed, and spark plugs need to be replaced or repaired. This is only some of the ways you can ensure that your car is ready at all times and won?t present any problems when you need it the most. Providing your car the necessary spare parts is very important in regular maintenance check-up. Despite the limited budget for it, you are still entitled to a cheap but good quality car parts. Brand-New Car Parts Of course, if you own a new sports utility vehicle, you also need to provide it with a new set of car parts once it needs repair. Before buying brand new car parts, consider some important points. First is what parts do you need to purchase? You can refer to the catalogue or instruction manual of your car and list down the right model number of those car parts. Next is where will you buy those parts? First option you can go to is your authorized car dealer where you have purchased the automobile. They can offer the right car parts plus discounts and guarantee for it. Aside from those, make sure that the parts they are offering are new and can last longer. Second option is the assorted car parts center. There you will find different brands of car parts. You can ask their sales staff to help you find the right parts that your automobile needs. If you are in doubt that they are selling new spare parts, you can also ask them and let them assure you that they are selling such kind. Second-Hand Car Parts You can also opt to purchase second-hand or used car parts. Before venturing into such options, the following should be taken into consideration: ? Since you are looking for some used car parts, the reliability of its source should be considered. Try to look in classified ads for possible vendors of such old car parts, or you go around the neighborhood and ask for their location. ? There are times that such used parts are only available in dealerships and in a local mechanic?s shop. It will be challenge for you to look for them, and there is always a possibility that the part you need will not match with the part they are offering. ? Always check the compatibility of the old car parts that a seller is offering. Some parts that are needed do not have to be original. There are surplus items or a compatible part from another car brand that you can use. It will be able to save you money for other things. ? If you are having difficulty looking for the parts you need, browse through the Internet especially for some old parts unavailable in your locality. Once you have found the right old car part dealer online, you can check their payment options. Be sure you are ready to accept their terms of reference of the parts that you want to acquire. Either brand-new or second-hand car parts ensure of its quality. Because just like human beings, cars also tends to malfunction if wrong parts are provided to it. Be careful and meticulous in selecting the spare parts needed for your car. Lavinia Snider is the editor of <a href="http://www.carauctionplaza.info">Car Auction Plaza</a>. Get detailed information on car and vehicle auctions.
Source: www.ArticlePros.com

Demystifying The Tire Sidewall Code
So, you need new tires for your car or truck, but how do you know what to buy? What do all those alphanumeric codes printed on the tire sidewalls mean, anyway? If you’re in the market for new tires, you may simply want to replace your worn tires with exactly the same tire it came with. But you MAY want to consider an upgrade. If you know how to read the tire sidewalls, chock full of valuable information, you’ve got an advantage over most people and are prepared to make an informed decision. So let’s get underway! Tire Size Markings (example: P215/65R15 89H) Broken down: P = Passenger Other designations are LT = Light Truck T = Temporary (spare tire) 215 is the width (in millimeters) of the tire from sidewall to sidewall. A wider tire has more grip but the bad news is that you lose fuel economy, hear more noise and the tires don’t work as well in the rain. 65 is the aspect ratio The aspect ratio is the ratio of sidewall height to tire width. With regards to aspect ratio, the larger the number, the taller the tire sidewall. Tall (60-75) is great for a quiet ride but causes howling in turns. Short (35-55) is better for handling–more for sports cars. R indicates Radial. This means it is constructed with a series of support belts sideways under the tread. Other designations include B for Belted Bias and D for Diagonal Bias The standard, and what you’ll see most often, is R. 15 is the wheel (or rim) diameter, in inches. 89 is the load index H is the speed rating Speed ratings indicate the top speed under ideal conditions. Higher-rated tires are usually made of softer rubber and will have shorter UTQG tread life. Here are a few of the more common speed ratings: R= 106, S=112, T=118, U=124, H=130, V=149, W=168, Y=186. Along with this speed rating, you have a load index which indicates the approximate weight the tire can carry. Some of the more common load weights are as follows: 85 = 1,135 pounds, 86 = 1,168 pounds, 87 = 1,201 pounds, 88 = 1,235 pounds. UTQG Ratings Passenger car tires are accompanied by a UTQG Rating (Uniform Tire Quality Grading, mandated by the Federal Government) which rates the tread life of tires by looking at tread wear, traction and temperature resistance. The UTQG Rating is usually found opposite the tire size markings and will be in three separate ratings: treadwear, traction and temperature. The treadware grade standard is 100. A grade of 200 means the tread would wear twice as well as a tire graded 100. Traction grades run from AA to C, with AA being the highest grade and C meaning the tire brakes poorly on both wet concrete and wet asphalt. Temperature grades rate the tire’s resistance to and ability to dispel heat. Those grades are A (resists heat well), B (not as good as A) and C (passes minimum safety standards.) Keep in mind that heavy loads, under-inflation of the tires, and high speeds can all affect the tire temperature. You should note that these tire grades rate tires measured under controlled conditions. Factors such as driving habits, road conditions, climate, etc., are not considerations and may affect the actual performance of your tire. DOT DOT (Department of Transportation) indicates the tire is in compliance with applicable DOT safety standards. Next to DOT is an identification or serial number–codes that designate where and when the tire was produced. You’ll also find other information on the sidewall such as the type and composition of the tire, the maximum cold inflation (PSI) and maximum load in pounds. So as you can see, tires carry a huge amount of information. But it’s really not all that complicated once you learn to read the code. Debbie Pettitt is webmaster for Everything Tires, your tire resource. For more information on tires, visit http://everythingtires.com
Source: www.ArticlePros.com

Replacing Ford Headlights
How horrible would it be one day to wake up and realize you don?t have any headlights? I think it would be pretty bad, it would not be safe to even drive your car if your headlights are broken or don?t work. Your lights are one of the parts that will last you a long while. But since they are on the exterior they are exposed to elements that can be damaging. They can loose their original luster. You can give your Ford vehicle a new fresh look by changing the grille, mirror, taillights, Ford hood and spoiler. It is really simple and easy to replace Ford parts, especially the lights. The reason for that is Fords popularity. A good place to look for the parts is Ford Parts Online; they are one of the most trusted auto parts dealers on the internet. So check them out if you need to replace any parts on your Ford vehicle. But let?s go back to your Ford lights. It?s quite easy to change them yourself, just follow my directions and you?ll be on the road again. First remove the exposed plastic or metal trim around the housing to get the headlight ring and screws. Using the right tools remove the four ring screws. Be careful, because it is pretty easy to strip them. Put some penetrating oil on each one for a few minutes. Also be sure not to turn the headlight-aiming screws. Once you remove the retaining ring the headlight will be free. Just unplug the wiring connector that is in the back of the headlamp. Then plug back the connector into the back of new headlight then place it in the mounting base. The headlight will position itself due to lugs in the back, but if it doesn?t then that means you have it upside down. Turn on the new headlight to see if it is working. If it doesn?t come on it probably means there is a problem with the wiring. You next step would be to replace the retaining ring. But again, be careful about the screws. The last thing would be to replace the trim elements that you had to remove. Mitch Johnson is a successful freelance author that writes regularly for <a href="http://www.atv-parts-n-accessories.com/" title="http://www.atv-parts-n-accessories.com/" target="_blank">http://www.atv-parts-n-accessories.com/</a> . His articles have also been featured on related sites such as <a href="http://www.myautopartstips.info/" title="http://www.myautopartstips.info/" target="_blank">http://www.myautopartstips.info/</a> and <a href="http://www.mybestautoparts.info/" title="http://www.mybestautoparts.info/" target="_blank">http://www.mybestautoparts.info/</a>
Source: www.ArticlePros.com